[kepler-dev] svn co of ptolemy-kepler-2.3 Fails

[Derik Barseghian]

Hey Scott,
Looks like Christopher fixed the issue, give the commands a try again and I think you'll be in business.

The eclipse reference I reference in that thread is section 22.2 of the link below. It's probably not necessary for you to look at.
http://chess.eecs.berkeley.edu/ptexternal/wiki/Main/Subversion#toc27

I wouldn't recommend trying to use the ptolemy-kepler-2.3.0.zip, though I'm sure that approach could be made to work, better to work off the ptolemy-kepler-2.3 branch directory so that things are easier and you'll be able to stay in sync w/ any patches that could get checked in.

Derik

On Jan 23, 2012, at 12:18 PM, Scott Zimmer wrote:

> Derik,
> 
> Yes, there was a typo on the URL I sent.   I copied the commands from an old version of the build procedures.  That (http://lists.nceas.ucsb.edu/kepler/pipermail/kepler-dev/2011-December/020028.html) is definitely the problem that I am seeing.  I saw in the thread that you refer to a solution that can be used with eclipse.  Is there another thread that discusses that work around?  Also, I've downloaded and unzipped ptolemy-kepler-2.3.0.zip from https://code.kepler-project.org/code/kepler/releases/released/ptolemy-kepler-2.3.0/. Can I use this version until the machine that hosts the svn repository for ptII is rebooted?
> 
> Scott
> 
> On 1/23/2012 2:42 PM, Derik Barseghian wrote:
>> Sorry, my turn to put in the wrong url. Here's what I meant:
>> http://lists.nceas.ucsb.edu/kepler/pipermail/kepler-dev/2011-December/020028.html
>> Derik
>> 
>> On Jan 23, 2012, at 11:41 AM, Derik Barseghian wrote:
>> 
>>> Hi Scott,
>>> You're not doing anything wrong (although you've made a typo in the email, that url is invalid).
>>> This sounds like this problem:
>>> https://code.kepler-project.org/code/kepler/branches/releases/release-branches/build-area-2.3
>>> Maybe the ptolemy svn server is out of memory.
>>> Derik
>>> 
>>> 
>>> On Jan 23, 2012, at 11:20 AM, Scott Zimmer wrote:
>>> 
>>>> I'm trying to build Kepler-2.3 from the source code and I'm getting an error when copying the files from the svn repository.  I executed the following commands
>>>> 
>>>> mkdir Kepler23Build
>>>> cd Kepler23Build
>>>> svn co https://code.kepler-project.org/code/kepler/branches/releases/release-branches/build-area-2.3 build-area
>>>> cd build-area
>>>> ant change-to -Dsuite=kepler-2.3
>>>> 
>>>> 
>>>> and I get the following error.  Only the last several lines of screen output are copied here.  I'd appreciate any help you could offer about what I'm doing wrong---Scott
>>>> 
>>>> [change-to] A    D:\Kepler23Build\ptolemy-kepler-2.3\src\ptolemy\domains\sdf\lib\vq\HTVQEncode.java
>>>> [change-to] A    D:\Kepler23Build\ptolemy-kepler-2.3\src\ptolemy\domains\sdf\lib\vq\ImageContrast.java
>>>> [change-to] A    D:\Kepler23Build\ptolemy-kepler-2.3\src\ptolemy\domains\sdf\lib\vq\PSNR.java
>>>> [change-to] A    D:\Kepler23Build\ptolemy-kepler-2.3\src\ptolemy\domains\sdf\lib\vq\sdfvqentities.xml
>>>> [change-to] A    D:\Kepler23Build\ptolemy-kepler-2.3\src\ptolemy\domains\sdf\lib\vq\ImageDisplay.java
>>>> [change-to] A    D:\Kepler23Build\ptolemy-kepler-2.3\src\ptolemy\domains\sdf\lib\vq\data
>>>> [change-to] svn: Compression of svndiff data failed
>>>> [change-to]
>>>> 
>>>> BUILD FAILED
>>>> D:\Kepler23Build\build-area\build.xml:97: ERROR: It appears that the command did not execute properly and exited with an
>>>> exit code of: 1
>>>> 
>>>> Total time: 10 minutes 25 seconds
>>>> 
>>>> -- 
>>>> Scott Zimmer
>>>> Optensity, Inc.
>>>> (512) 299-7218
>>>> 
>>>> _______________________________________________
>>>> Kepler-dev mailing list
>>>> Kepler-dev at kepler-project.org
>>>> http://lists.nceas.ucsb.edu/kepler/mailman/listinfo/kepler-dev
>>> _______________________________________________
>>> Kepler-dev mailing list
>>> Kepler-dev at kepler-project.org
>>> http://lists.nceas.ucsb.edu/kepler/mailman/listinfo/kepler-dev
> 
> 
> -- 
> Scott Zimmer
> Optensity, Inc.
> (512) 299-7218
>