[kepler-dev] [kepler-users] Q RE: outside subversion repositories
Matt Jones
jones at nceas.ucsb.edu
Wed Feb 24 16:06:46 PST 2010
Chad -- Can you make sure this summary makes it into the build documentation
so that it is clear for the next people who want to use their own svn
repository?
Thanks,
Matt
On Wed, Feb 24, 2010 at 2:57 PM, Chad Berkley <berkley at nceas.ucsb.edu>wrote:
> Great! I'm glad it worked for you. Thanks for passing the info along to
> others.
>
> Let us know if you have any other questions.
>
> chad
>
>
> Thomas M. Parris wrote:
>
>> Chad,
>>
>> Many thanks! I think I now have this working as advertised. The
>> following
>> seems to have made the difference. I think I'm over this hump.
>>
>> 1. code had to be checked out of our local svn repository (this was a
>> rookie
>> mistake).
>> 2. ssh had to be configured to log in with public key without a
>> passphrase.
>> (I had deferred doing this for expediency, but the prompts effectively
>> hung
>> the "ant update").
>>
>> So to summarize the recipe for others ...
>>
>> 1. pre-requisites
>> a. establish a local svn repository
>> b. configure it so it can be accessed w/o user name/pw prompts
>> (e.g., via ssh with public key)
>>
>> 2. create a custom suite per the build directions, see
>>
>> https://kepler-project.org/developers/teams/build/documentation/build-system
>> -instructions
>>
>> https://kepler-project.org/developers/teams/build/documentation/developing-a
>> -hello-world-actor-using-the-kepler-build-system-and-eclipse
>>
>> 3. edit the <module.dir>/<suite>/module-info/modules.txt along the lines
>> of
>> the following ...
>>
>> <suite> svn+ssh://localserver/repo/trunk
>> *kepler
>>
>> NOTE: last line above sets the kepler suite to the development trunk.
>> Change as necessary to use a stable release.
>>
>> 4. check out your code from your local svn repository
>>
>> cd <modules.dir>/<suite>
>> svn co svn+ssh://localserver/repo/trunk
>>
>> 5. update and run
>>
>> cd <modules.dir>/build-area
>> ant update
>> ant run
>>
>> -- Tom
>>
>> -----Original Message-----
>> From: Chad Berkley [mailto:berkley at nceas.ucsb.edu] Sent: Wednesday,
>> February 24, 2010 3:22 PM
>> To: Thomas M. Parris
>> Cc: 'Sean Riddle'; 'kepler-users'
>> Subject: Re: [kepler-users] Q RE: outside subversion repositories
>>
>> is there a isciences directory below the build-area? If so, delete it and
>> try again.
>>
>> See my other comments below:
>>
>> Thomas M. Parris wrote:
>>
>>> Chad, Sean,
>>>
>>> Many thanks for your suggestions! I did the following:
>>>
>>> 1. deleted the second isiences line
>>> 2. cd <modules.dir>
>>> 3. ant -change-to -Dsuite=isciences
>>> 4. ant update
>>>
>>> And get the same status message ...
>>>
>>> update:
>>> [update-modules] Updating isciences...
>>> [update-modules] svn -r head update --accept postpone C:\Program
>>> Files\Kepler\svn\isciences [update-modules] At revision 23190.
>>>
>>> I also get the following at the conclusion of "ant update"
>>>
>>> [update-modules] Updating build-area...
>>> [update-modules] svn -r head update --accept postpone C:\Program
>>> Files\Kepler\svn\build-area [update-modules] svn: Working copy 'C:\Program
>>> Files\Kepler\svn\build-area'
>>> locked
>>> [update-modules] svn: run 'svn cleanup' to remove locks (type 'svn help
>>> cleanup' for details) [update-modules]
>>>
>>> BUILD FAILED
>>> ERROR: It appears that the command did not execute properly and exited
>>> with an exit code of: 1
>>>
>>> 5. I've run "svn cleanup" and that last error keeps appearing. I've been
>>> ignoring it.
>>>
>>
>> The only fix I've found to this is to delete the directory and do a new
>> checkout. the cleanup command has never worked for me.
>>
>> 6. I did not explicitly "check out" the code I imported into the svn
>>> repository. I've not used svn before, does it create "dot" files that would
>>> modify the "ant update" sequence? Do I need to clean out "dot" files that
>>> might be left over from previous "ant update" commands (before I tried using
>>> the outside repository)?
>>>
>>>
>> yes, it creates a directory, .svn, in every checked out directory. This
>> is
>> where all of the svn config lives. If you nuke that directory, you no
>> longer have versioned source.
>>
>> 7. I've used a tab chacracter as a separator between "isciences" and
>>> "svn+ssh" in the modules.txt file. Could that be a problem?
>>>
>>
>> umm, hopefully not, but try a space instead just to be sure.
>>
>> If all else fails, just try deleting everything except for build-area and
>> try again. You can also just try checking out your isciences directory
>> manually (at the same level as build-area) then do the change-to command.
>> the build should find the isciences dir and not try to check it out again.
>>
>> chad
>>
>>
>> Cheers,
>>> Tom
>>>
>>> -----Original Message-----
>>> From: Chad Berkley [mailto:berkley at nceas.ucsb.edu]
>>> Sent: Wednesday, February 24, 2010 1:05 PM
>>> To: Sean Riddle
>>> Cc: Thomas M. Parris; 'kepler-users'
>>> Subject: Re: [kepler-users] Q RE: outside subversion repositories
>>>
>>> Ah, yeah, nice catch, Sean. You're probably right. See if it works
>>> after you remove that 2nd isciences lines.
>>>
>>> chad
>>>
>>>
>>> Sean Riddle wrote:
>>>
>>>> My first instinct would be that you should only have isciences on a
>>>> single line, not two, as you have. Just have the line with the svn+ssh
>>>> declaration. Having isciences on a line by itself implies that it is within
>>>> the main Kepler repository (and might clobber what it just learned in the
>>>> previous line about where the module really is).
>>>>
>>>> - Sean
>>>>
>>>>
>>>> On Feb 24, 2010, at 9:55 AM, Thomas M. Parris wrote:
>>>>
>>>> Dear Keplerites:
>>>>>
>>>>> We are developing java actors that need to shared amongst our
>>>>> workgroup.
>>>>> The most effective way of doing that seems to be via an "outside"
>>>>> subversion
>>>>> repository. I've been testing this, but am not convinced it is working
>>>>> how I would expect. This is probably a stupid newbie question, but I can't
>>>>> find a remedy for it.
>>>>>
>>>>> 1. I have followed the build system instructions through "runinng
>>>>>
>>>> kepler"
>>
>>> for the trunk (-Dmodule=kepler) at
>>>>> https://kepler-project.org/developers/teams/build/documentation/buil
>>>>> d
>>>>> -system
>>>>>
>>>>> -instructions
>>>>>
>>>>> 2. I have create a new suite ("isciences")
>>>>>
>>>>> 3. I have succesfully written and tested a java actor in that suite
>>>>> (using Eclipse as my IDE).
>>>>>
>>>>> 4. I have create a local svn repository for the code and imported the
>>>>> contents of ~/<modules.dir>/isciences
>>>>>
>>>>> 5. I have edited the ../isciences/module-info/modules.txt to refer to
>>>>> my local svn repository
>>>>>
>>>>> isciences svn+ssh://localserver/data/svn/isciences/kepler/trunk
>>>>> isciences
>>>>> *kepler
>>>>>
>>>>> 6. However, when I run "ant update" I get the following log message
>>>>>
>>>>> $ ant update
>>>>> Buildfile: build.xml
>>>>>
>>>>> update:
>>>>> [update-modules] Updating isciences...
>>>>> [update-modules] svn -r head update --accept postpone C:\Program
>>>>> Files\Kepler\svn\isciences
>>>>> [update-modules] At revision 23190.
>>>>>
>>>>> 7. The high version number (which matches that for all of the other
>>>>> modules)
>>>>> would seem to suggest that ant is looking at the main kepler svn
>>>>> repository instead my of local repository which is at version 5.
>>>>>
>>>>> $ svn info svn+ssh://localserver/data/svn/isciences/kepler/trunk
>>>>> Path: trunk
>>>>> URL: svn+ssh://localserver/data/svn/isciences/kepler/trunk
>>>>> Repository Root: svn+ssh://peach/data/svn/isciences
>>>>> Repository UUID: a5151eea-c5c2-4131-9986-ee679ac9cc5e
>>>>> Revision: 5
>>>>> Node Kind: directory
>>>>> Last Changed Author: parris
>>>>> Last Changed Rev: 5
>>>>> Last Changed Date: 2010-02-24 12:23:57 -0500 (Wed, 24 Feb 2010)
>>>>>
>>>>> 8. What am I doing wrong?
>>>>>
>>>>> With many thanks in advance,
>>>>> Tom
>>>>> ----------------------------------------------------
>>>>> Thomas M. Parris
>>>>> Vice President
>>>>> ISciences, LLC
>>>>> 61 Main Street, Suite 200
>>>>> Burlington, VT 05401
>>>>> Voice: +802-864-2999
>>>>> Fax: +617-344-2580
>>>>> Email: parris at isciences.com
>>>>>
>>>>> http://www.isciences.com/ http://www.terraviva.net/
>>>>> ----------------------------------------------------
>>>>>
>>>>> _______________________________________________
>>>>> Kepler-users mailing list
>>>>> Kepler-users at kepler-project.org
>>>>> http://mercury.nceas.ucsb.edu/kepler/mailman/listinfo/kepler-users
>>>>>
>>>> _______________________________________________
>>>> Kepler-users mailing list
>>>> Kepler-users at kepler-project.org
>>>> http://mercury.nceas.ucsb.edu/kepler/mailman/listinfo/kepler-users
>>>>
>>>
>> _______________________________________________
> Kepler-users mailing list
> Kepler-users at kepler-project.org
> http://mercury.nceas.ucsb.edu/kepler/mailman/listinfo/kepler-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mercury.nceas.ucsb.edu/kepler/pipermail/kepler-dev/attachments/20100224/2a3a976f/attachment.html>
More information about the Kepler-dev
mailing list