[kepler-dev] Query Regarding Interactive Shell Actor
subhav mital
mital.subhav at gmail.com
Mon Mar 29 18:12:32 PDT 2010
Hi Christopher,
I just restarted my system and freshly checked out a new version using the
instructions.
The interactive shell hangs again. Just a blank screen gets shown. This does
not happen with the pre-alpha version in windows.
Thanks.
On Mon, Mar 29, 2010 at 9:08 PM, subhav mital <mital.subhav at gmail.com>wrote:
> Hi Christopher,
>
> Following is configuration I use:
>
> - Ubuntu 9.10
> -I followed instructions given here:
> http://mercury.nceas.ucsb.edu/kepler/pipermail/kepler-dev/2010-February/017445.html
> - I run it from command line. (Terminal)
>
> Thanks.
>
>
> On Mon, Mar 29, 2010 at 9:06 PM, subhav mital <mital.subhav at gmail.com>wrote:
>
>> Hi Chad,
>>
>> -I am using Ubuntu 9.10
>> -I exactly followed instructions here:
>> http://mercury.nceas.ucsb.edu/kepler/pipermail/kepler-dev/2010-February/017445.html
>> - I am running it from command line. (Terminal)
>>
>> Thanks.
>>
>>
>> On Mon, Mar 29, 2010 at 9:02 PM, Christopher Brooks <
>> cxh at eecs.berkeley.edu> wrote:
>>
>>> Hi Subhav,
>>>
>>> Before we go much further, could you answer these questions:
>>>
>>> > If you are getting different behavior, then let me know:
>>> > 1) What operating system are you running? I'm assuming it is
>>> Ubuntu
>>> > 9.10
>>> > 2) How did you build the release? I'm assuming you built Kepler
>>> 2.0
>>> > from sources.
>>> > 3) Are you running from within Eclipse or from the Command line?
>>>
>>>
>>> When I try to open the trialSwitch.xml model in either the
>>> Kepler-2.0-rc1 candidate or a devel version of the Kepler-2.0 head, I
>>> get:
>>>
>>> ptolemy.kernel.util.IllegalActionException: No Kepler ID was or could be
>>> assigned to model: java.lang.ClassCastException:
>>> ptolemy.kernel.util.StringAttribute
>>> at
>>> org.kepler.gui.frame.KeplerGraphTableau.<init>(KeplerGraphTableau.java:152)
>>> at
>>> org.kepler.gui.frame.KeplerGraphTableau$Factory.createTableau(KeplerGraphTableau.java:227)
>>> at
>>> ptolemy.actor.gui.PtolemyTableauFactory.createTableau(PtolemyTableauFactory.java:100)
>>> at
>>> ptolemy.actor.gui.TableauFactory.createTableau(TableauFactory.java:127)
>>> at
>>> ptolemy.actor.gui.Configuration.createPrimaryTableau(Configuration.java:569)
>>> at
>>> ptolemy.actor.gui.Configuration.openModel(Configuration.java:875)
>>> at
>>> ptolemy.actor.gui.Configuration.openModel(Configuration.java:783)
>>> at ptolemy.actor.gui.TableauFrame._read(TableauFrame.java:987)
>>> at ptolemy.gui.Top._open(Top.java:801)
>>> at ptolemy.gui.Top$FileMenuListener.actionPerformed(Top.java:1207)
>>> at
>>> org.kepler.gui.MenuMapper$1.actionPerformed(MenuMapper.java:361)
>>> at
>>> javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
>>> at
>>> javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
>>> at
>>> javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
>>> at
>>> javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
>>> at javax.swing.AbstractButton.doClick(AbstractButton.java:334)
>>> at
>>> apple.laf.ScreenMenuItem.actionPerformed(ScreenMenuItem.java:95)
>>> at java.awt.MenuItem.processActionEvent(MenuItem.java:597)
>>> at java.awt.MenuItem.processEvent(MenuItem.java:556)
>>> at
>>> java.awt.MenuComponent.dispatchEventImpl(MenuComponent.java:298)
>>> at java.awt.MenuComponent.dispatchEvent(MenuComponent.java:286)
>>> at java.awt.EventQueue.dispatchEvent(EventQueue.java:466)
>>> at
>>> java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
>>> at
>>> java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
>>> at
>>> java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
>>> at
>>> java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
>>> at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
>>>
>>> When I run it in my Ptolemy II devel tree, it opens fine.
>>>
>>>
>>>
>>> On 3/29/10 4:14 PM, subhav mital wrote:
>>>
>>>> Thanks a lot for trying this and running me through these options in
>>>> detail.
>>>> My question is that should it not pop-open a different display window,
>>>> since thats really the functionality I desire.
>>>>
>>>
>>> I don't understand the above, I get only one display.
>>>
>>>> Could you please try this
>>>>
>>>> with the current attached workflow?
>>>>
>>>> Display is just an example. In reality, I am trying to launch programs
>>>> using external execution. Would this mimic the functionality you
>>>> described? (Each time an option is selected, it launches a different
>>>> instance of the program)
>>>>
>>>> Please try the following:
>>>>
>>>> 1) Start the workflow
>>>> 2) Enter 1, five times.
>>>> 3) "Operation on the Second Branch" should appear five times in the same
>>>> run. Each output appears in a different display window. Hence five
>>>> display windows with the message, in the same run. (without stopping the
>>>> workflow)
>>>>
>>>
>>> Under Mac OS X, I get one display window with "Operation on the Second
>>> Branch" 5 times.
>>> This sounds different from what you are getting, which would be 5
>>> different
>>> display windows?
>>> I also tried this on a Linux box, but I got the same result.
>>>
>>> I suggest rebuilding from scratch and then trying a different machine.
>>> You could also try running just the Ptolemy II 8.0.beta release, see
>>> http://ptolemy.eecs.berkeley.edu/ptolemyII
>>>
>>> _Christopher
>>>
>>>
>>>> Please verify, if this is working for you?
>>>>
>>>> Thanks..
>>>>
>>>>
>>>
>>>>
>>>> On Mon, Mar 29, 2010 at 3:59 PM, Christopher Brooks
>>>> <cxh at eecs.berkeley.edu <mailto:cxh at eecs.berkeley.edu>> wrote:
>>>>
>>>> Hi Subhav,
>>>> When I open the attached LoopTry.xml model in a Kepler-2.0 release
>>>> candidate
>>>> under Mac OS X, I can type the same character into the Interactive
>>>> Shell Actor
>>>> and it appears in the output. See the attached screen shot.
>>>>
>>>> One interesting thing is that the focus moves from the Interactive
>>>> Shell to
>>>> the Display, but this happens only the first time I run the model.
>>>>
>>>> More precisely, what I do is:
>>>>
>>>> 1) Start up Kepler-2.0
>>>> 2) File->Open File, Browse to LoopTry.xml select it and hit open
>>>> 3) In the new graph editor, hit the run button
>>>> 4) In the ".LoopTry.InteractiveShell" window, type a 1
>>>> 5) A ".LoopTry.Display" window appears that has the focus and that
>>>> window has a 1 in it. I dragged the display window to a
>>>> location adjacent to the InteractiveShell window.
>>>>
>>>> 6) Click on the ".LoopTry.InteractiveShell" window and type a 1
>>>> 7) In the Display window, a 1 appears, but the focus remains in
>>>> the InteractiveShell window.
>>>> 8) In the ".LoopTry.InteractiveShell" window, type a 1
>>>> 9) Same behavior as step 7
>>>>
>>>>
>>>> If you are getting different behavior, then let me know:
>>>> 1) What operating system are you running? I'm assuming it is Ubuntu
>>>> 9.10
>>>> 2) How did you build the release? I'm assuming you built Kepler 2.0
>>>> from sources.
>>>> 3) Are you running from within Eclipse or from the Command line?
>>>>
>>>> You might try a reboot or try a different machine to see if the
>>>> problem is specific to your machine. Doing a new build might also
>>>> help.
>>>>
>>>> _Christopher
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On 3/28/10 11:31 PM, subhav mital wrote:
>>>>
>>>> Any suggestions on where I could be going wrong?
>>>> Thanks for your help.
>>>>
>>>>
>>>> On Mon, Mar 29, 2010 at 12:06 AM, Edward A. Lee
>>>> <eal at eecs.berkeley.edu <mailto:eal at eecs.berkeley.edu>
>>>> <mailto:eal at eecs.berkeley.edu <mailto:eal at eecs.berkeley.edu>>>
>>>>
>>>> wrote:
>>>>
>>>>
>>>> Works for me... :-)
>>>>
>>>> Edward
>>>>
>>>>
>>>>
>>>> On 3/28/10 1:31 PM, subhav mital wrote:
>>>>
>>>> Hi,
>>>>
>>>> While using the interactive shell actor, I realized that
>>>> it does not
>>>> accept the same value twice. Any idea why?
>>>> Eg: If I enter 1 it gets displayed. Again if I enter 1
>>>> on the
>>>> prompt,
>>>> nothing happens.
>>>>
>>>> My use case is implementing a switch case which can
>>>> iterate over
>>>> cases
>>>> as prompted from the user. Eg: Case 1: 5 times, Case 2:
>>>> 3 times.
>>>>
>>>> Attached is a simple workflow to try this.
>>>>
>>>> Please offer suggestions if anyone has implemented a
>>>> similar
>>>> functionality.
>>>>
>>>> Thanks.
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Kepler-dev mailing list
>>>> Kepler-dev at kepler-project.org
>>>> <mailto:Kepler-dev at kepler-project.org>
>>>> <mailto:Kepler-dev at kepler-project.org
>>>> <mailto:Kepler-dev at kepler-project.org>>
>>>>
>>>> http://mercury.nceas.ucsb.edu/kepler/mailman/listinfo/kepler-dev
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Kepler-dev mailing list
>>>> Kepler-dev at kepler-project.org <mailto:
>>>> Kepler-dev at kepler-project.org>
>>>> http://mercury.nceas.ucsb.edu/kepler/mailman/listinfo/kepler-dev
>>>>
>>>>
>>>> --
>>>>
>>>> Christopher Brooks, PMP University of
>>>> California
>>>> CHESS Executive Director US Mail: 337 Cory Hall
>>>> Programmer/Analyst CHESS/Ptolemy/Trust Berkeley, CA 94720-1774
>>>> ph: 510.643.9841 fax:510.642.2718 (Office: 545Q Cory)
>>>> home: (F-Tu) 707.665.0131 cell: 707.332.0670
>>>>
>>>>
>>>>
>>> --
>>> Christopher Brooks, PMP University of California
>>> CHESS Executive Director US Mail: 337 Cory Hall
>>> Programmer/Analyst CHESS/Ptolemy/Trust Berkeley, CA 94720-1774
>>> ph: 510.643.9841 fax:510.642.2718 (Office: 545Q Cory)
>>> home: (F-Tu) 707.665.0131 cell: 707.332.0670
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mercury.nceas.ucsb.edu/kepler/pipermail/kepler-dev/attachments/20100329/8af0a82a/attachment-0001.html>
More information about the Kepler-dev
mailing list