[kepler-dev] simple question with rebuilding kepler from sources
Unni Pillai
unni.pillai at nyu.edu
Wed Apr 25 08:17:44 PDT 2007
Hi Folks
I think my sources are matching the repositories for PTII and
Kepler. I went through the necessary hoops to get it.
I was able to build my PTII correctly and invoke vergil editor and
test some demos. I went ahead and downloaded the kepler sources from
cvs account at ecoinformatics and went through steps outlined in the
install doc found here http://cvs.ecoinformatics.org/cvs/cvsweb.cgi/
~checkout~/kepler/INSTALL?content-type=text/plain
The problem arises when I go to build kepler (ant buildkarlib)
missing MANIFEST.MF kepler/src/actors/ADNToHTMLConversion/MANIFEST.MF
does not exist.
Can somebody verify if this file is missing from the repository or
suggest workaround.
asterix:~/Documents/projects/ndiipp-ptv/kepler unni$ echo $KEPLER
/Users/unni/Documents/projects/ndiipp-ptv/kepler
asterix:~/Documents/projects/ndiipp-ptv/kepler unni$ echo $PTII
/Users/unni/Documents/projects/ndiipp-ptv/ptII
asterix:~/Documents/projects/ndiipp-ptv/kepler unni$ echo $JAVA_HOME
/Library/Java/Home
asterix:~/Documents/projects/ndiipp-ptv/kepler unni$ which ant
/usr/bin/ant
asterix:~/Documents/projects/ndiipp-ptv/kepler unni$ ant full-clean
ptolemy
Buildfile: build.xml
BUILD SUCCESSFUL
Total time: 4 minutes 12 seconds
asterix:~/Documents/projects/ndiipp-ptv/kepler unni$ ant buildkarlib
BUILD FAILED
/Users/unni/Documents/projects/ndiipp-ptv/kepler/build.xml:889: The
following error occurred while executing this line:
/Users/unni/Documents/projects/ndiipp-ptv/kepler/build.xml:909:
Manifest file: /Users/unni/Documents/projects/ndiipp-ptv/kepler/src/
actors/ADNToHTMLConversion/MANIFEST.MF does not exist.
Total time: 0 seconds
Thanks
Unni
On Apr 24, 2007, at 4:24 PM, Christopher Brooks wrote:
> Hi Unni,
>
> For information about read access to the ptII repository, see:
> http://chess.eecs.berkeley.edu/ptexternal/
>
> _Christopher
> --------
>
> Thanks for the response
>
> I guess I'd need access to the CHESS CVS server also. Since the
> =20
> PtolemyII I built is from sources obtained at PtolemyII
> website. Any =20=
>
> way to get access to these servers today if possible.
>
> Unni
>
>
> On Apr 24, 2007, at 4:08 PM, Chad Berkley wrote:
>
>> If you want to recompile stuff, you'll definitely want the CVS =20
>> version. Let me know if no one responds to your cvs account =20
>> request by tomorrow. You'll also need to check out ptolemy from =20
>> the CHESS CVS server. See the build instructions here: http://=20
>> cvs.ecoinformatics.org/cvs/cvsweb.cgi/~checkout~/kepler/INSTALL?=20
>> content-type=3Dtext/plain
>>
>> chad
>>
>> Unni Pillai wrote:
>>> Hi Dan
>>> So to work with nightly build we only need to set the KEPLER =20
>>> environment variable. I just need some clarification with how we
>>> =20
>>> go about rebuilding kepler if we touch any kepler java srcs from =20
>>> the nightly build or should I be working with kepler sources =20
>>> obtained from the cvs repository?
>>> I've requested pmc at ecoinformatics.org =20
>>> <mailto:pmc at ecoinformatics.org> for read access to the cvs =20
>>> repository.
>>> Thanks
>>> Unni
>>> On Apr 23, 2007, at 4:29 PM, Dan Higgins wrote:
>>>> Hi,
>>>> If you are starting with the nightly zipped version of =20
>>>> Kepler, all of the needed Ptolemy code has been precompiled and =20
>>>> is in the kepler.jar file (both the source and the *.class =20
>>>> compiled files). You actually do not need the PTII env variable =20
>>>> for running kepler since the kepler.jar is in the class path. =20
>>>> Kepler source code is in the 'src/ subdirectory of the nightly =20
>>>> build. As Ilkay suggested, you probably should checkout fresh =20
>>>> CVS versions and start from there if you plan extensive changes.
>>>>
>>>> Ilkay Altintas wrote:
>>>>> Unni,
>>>>>
>>>>> The problem seems to be your PTII variable. To be able to build
>>>>> =20
>>>>> the nightly build from scratch, you need a version of Ptolemy
>>>>> in =20=
>
>>>>> your home directory (it probably already installs a version)
>>>>> and =20=
>
>>>>> point the PTII variable to that directory.
>>>>> You can also request a read-only kepler cvs account from =20
>>>>> "pmc at ecoinformatics.org <mailto:pmc at ecoinformatics.org>" and =20
>>>>> check out both kepler and ptolemy to build everything from
>>>>> scratch.
>>>>>
>>>>> -ilkay
>>>>>
>>>>> On Apr 23, 2007, at 12:13 PM, Unni Pillai wrote:
>>>>>
>>>>>> Hi
>>>>>>
>>>>>> Following Lucas suggestion, I had downloaded the nightly build
>>>>>> =20
>>>>>> (April 18th) and got it up and running using kepler.sh, but =20
>>>>>> I've run into some silly problems.
>>>>>>
>>>>>> Since I plan on doing some hacks locally I decided to be a bit
>>>>>> =20
>>>>>> wild and did the following from a shell ant full-clean ptolemy.
>>>>>>
>>>>>> I'm testing on Mac OSX v 10.4.9
>>>>>> My environment variables are set as follows:
>>>>>> asterix:~/Documents/projects/ndiipp-ptv/kepler unni$ echo $KEPLER
>>>>>> /Users/unni/Documents/projects/ndiipp-ptv/kepler
>>>>>> *asterix:~/Documents/projects/ndiipp-ptv/kepler unni$ echo $PTII*
>>>>>> */Users/unni/Documents/projects/ndiipp-ptv/kepler/build*
>>>>>> asterix:~/Documents/projects/ndiipp-ptv/kepler unni$ echo =20
>>>>>> $JAVA_HOME
>>>>>> /Library/Java/Home
>>>>>>
>>>>>> My concern is did the nightly build bring in the appropriate =20
>>>>>> Ptolemy sources or am I missing some step since not sure if =20
>>>>>> Ptolemy came through or most likely I set my PTII environment =20
>>>>>> variable incorrectly.
>>>>>>
>>>>>> I'm getting whole slew of errors when I attempt to build
>>>>>> BUILD FAILED
>>>>>> /Users/unni/Documents/projects/ndiipp-ptv/kepler/build.xml:
>>>>>> 748: =20=
>
>>>>>> The following error occurred while executing this line:
>>>>>> /Users/unni/Documents/projects/ndiipp-ptv/kepler/build-=20
>>>>>> ptolemy.xml:106: /Users/unni/Documents/projects/ndiipp-ptv/=20
>>>>>> kepler/build/ptolemy/distributed/config not found.
>>>>>>
>>>>>> Something is fishy with my PTII variable
>>>>>> Can someone point me to the correct environment variable setup
>>>>>> =20
>>>>>> for working with nightly builds.
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> Unni
>>>>>>
>>>>>> P.S. My previous postings to kepler dev list never show up, =20
>>>>>> hence decided to contact you folks who do development with the
>>>>>> =20
>>>>>> nightly builds or build from source.
>>>>>>
>>>>>> Also as reference this is how my kepler directory looks after =20
>>>>>> ant clean
>>>>>>
>>>>>> asterix:~/Documents/projects/ndiipp-ptv/kepler unni$ ls -l
>>>>>> total 656
>>>>>> -rw-r--r-- 1 unni unni 6802 Apr 23 13:59 INSTALL
>>>>>> -rw-r--r-- 1 unni unni 7005 Apr 23 13:59 README.txt
>>>>>> -rw-r--r-- 1 unni unni 991 Apr 23 13:59 UDF_skolem.class
>>>>>> -rw-r--r-- 1 unni unni 736 Apr 23 13:59 UDF_split.class
>>>>>> -rw-r--r-- 1 unni unni 3497 Apr 23 13:59 build-doc.xml
>>>>>> -rw-r--r-- 1 unni unni 20897 Apr 23 13:59 build-ptolemy.xml
>>>>>> -rw-r--r-- 1 unni unni 5146 Apr 23 13:59 build-scia.xml
>>>>>> -rw-r--r-- 1 unni unni 66921 Apr 23 13:59 build.xml
>>>>>> drwxr-xr-x 6 unni unni 204 Apr 23 13:59 cog
>>>>>> drwxr-xr-x 4 unni unni 136 Apr 23 13:58 configs
>>>>>> -rw-r--r-- 1 unni unni 1230 Apr 23 13:59 copyright.txt
>>>>>> drwxr-xr-x 7 unni unni 238 Apr 23 13:58 demos
>>>>>> drwxr-xr-x 4 unni unni 136 Apr 23 13:59 dev
>>>>>> drwxr-xr-x 4 unni unni 136 Apr 23 13:58 doc
>>>>>> -rw-r--r-- 1 unni unni 3583 Apr 23 13:59 hsql-license.txt
>>>>>> -rw-r--r-- 1 unni unni 59 Apr 23 13:59 hsqlTool.bat
>>>>>> -rw-r--r-- 1 unni unni 4418 Apr 23 13:59 kepler.bat
>>>>>> -rw-r--r-- 1 unni unni 4394 Apr 23 13:59 kepler.sh
>>>>>> -rw-r--r-- 1 unni unni 121 Apr 23 13:59 keplerLog4J.log
>>>>>> drwxr-xr-x 50 unni unni 1700 Apr 23 13:58 lib
>>>>>> -rw-r--r-- 1 unni unni 143360 Apr 23 13:59 libexpat.dll
>>>>>> -rw-r--r-- 1 unni unni 2012 Apr 23 13:59 log4j.properties
>>>>>> -rw-r--r-- 1 unni unni 4397 Apr 23 13:59 momlexecute.sh
>>>>>> drwxr-xr-x 5 unni unni 170 Apr 23 13:57 plugins
>>>>>> drwxr-xr-x 11 unni unni 374 Apr 23 13:58 src
>>>>>> -rw-r--r-- 1 unni unni 14379 Apr 23 13:59 start.html
>>>>>> drwxr-xr-x 12 unni unni 408 Apr 23 13:58 webservice
>>>>>> drwxr-xr-x 4 unni unni 136 Apr 23 13:58 website
>>>>>> drwxr-xr-x 24 unni unni 816 Apr 23 13:58 workflows
>>>>>> drwxr-xr-x 3 unni unni 102 Apr 23 13:58 zipdir
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> *Unni Pillai* *|* Software Engineer / Analyst | Digital
>>>>>> Library =20=
>
>>>>>> <http://library.nyu.edu/diglib/> | NDIIPP-PDPTV <http://=20
>>>>>> www.ptvdigitalarchive.org/purpose/> =E2=9C=89
>>>>>> unni.pillai at nyu.edu =20
> =
>
>>>>>> <mailto:unni.pillai at nyu.edu> | =E2=9C=86 (212) 992-9741 | AIM:
>>>>>> =20
>>>>>> upillai at mac.com <mailto:upillai at mac.com> | Jabber: =20
>>>>>> unni.pillainyc at gmail.com <mailto:unni.pillainyc at gmail.com>
>>>>>>
>>>>>>
>>>>>
>>>>> --=20
>>>>> Ilkay ALTINTAS
>>>>> Lab Director, Scientific Workflow Automation Technologies (SWAT)
>>>>> San Diego Supercomputer Center(SDSC), UCSD
>>>>> 9500 Gilman Drive, MC: 0505 La Jolla, CA 92093-0505
>>>>> phone: (858) 822-5453 fax: (858) 534-8303
>>>>> web: http://users.sdsc.edu/~altintas <http://users.sdsc.edu/%=20
>>>>> 7Ealtintas>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------
>>>>> -=20
> =
>
>>>>> -----
>>>>>
>>>>> _______________________________________________
>>>>> Kepler-dev mailing list
>>>>> Kepler-dev at ecoinformatics.org
>>>>> http://mercury.nceas.ucsb.edu/ecoinformatics/mailman/listinfo/=20
>>>>> kepler-dev
>>>>>
>>>>
>>>>
>>>> --=20
>>>> *******************************************************************
>>>> Dan Higgins higgins at nceas.ucsb.edu
>>>> http://www.nceas.ucsb.edu/ Ph: 805-893-5127
>>>> National Center for Ecological Analysis and Synthesis (NCEAS) =20
>>>> Marine Science Building - Room 3405
>>>> Santa Barbara, CA 93195
>>>> *******************************************************************
>>> --------------------------------------------------------------------
>>> -=20
> =
>
>>> ---
>>> _______________________________________________
>>> Kepler-dev mailing list
>>> Kepler-dev at ecoinformatics.org
>>> http://mercury.nceas.ucsb.edu/ecoinformatics/mailman/listinfo/=20
>>> kepler-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mercury.nceas.ucsb.edu/kepler/pipermail/kepler-dev/attachments/20070425/f9909a08/attachment.html>
More information about the Kepler-dev
mailing list