[kepler-users] Monitor Value and Display

[Edward A. Lee]

I think it would be wrong for the Display to not open if handed
empty strings to display, since empty strings are actually information
(albeit not much :-)

If you send me a MoML file with your class definition, I'll take a
look at the problems you cite.

Edward

At 02:10 PM 11/12/2007, Kenneth Evans wrote:
>Edward,
>
>Thanks, I think it works much better with those changes.
>
>I wanted the Display to appear only if the contents are not blank.  What you
>did is a necessary condition for that to be possible.  I can in fact do this
>using an Expression involving input.length() and a BooleanSwitch.  I had
>some problems, though.
>
>1. In Kepler I could not use a StringCompare with the second string equal to
>"" in place of the Expression.  It returned False even when a Monitor said
>the value was "" and an Expression using input.length() said the length was
>0.  (Why I ended up using input.length() in an Expression).  I don't
>understand that.
>
>2. I tried to make a ConditionalDisplay class with the switch logic and a
>Display inside the class (since I had several of these and it makes the
>diagram much cleaner).  It works but seems to ignore the default parameters
>of 10 rows by 80 columns that I specified in the class and uses what are
>probably the default parameters for the Display.
>
>3. I could not define parameters in the class to pass things like the title
>to the Display.  It ignores them in the same way.  What I would like to do
>is have a parameter in the class that is named rowsDisplayed and use that as
>the value of the rowsDisplayed parameter of the Display inside the class.  I
>did not find syntax to do this.  At this point I would guess you probably
>can't use an expression for the Display parameters like you can in a
>Constant, for example.  (Or else I don't understand ;-)
> 
>Thanks,
>
>        -Ken
>
>-----Original Message-----
>From: Edward A. Lee [mailto:eal at eecs.berkeley.edu] 
>Sent: Saturday, November 10, 2007 2:55 AM
>To: Kenneth Evans
>Cc: Kepler Mailing List
>Subject: Re: [kepler-users] Monitor Value and Display
>
>
>Hi Ken.
>
>I'm checking in the following improvements:
>
>  Display: Modified to open the window only on receipt of the first token.
>  MonitorValue: Modified to clear the display in initialize
>
>Thanks for the suggestions.
>
>Edward
>
>At 11:09 AM 11/8/2007, Kenneth Evans wrote:
>>Hi,
>>
>>I have minor problems with Monitor Value and Display that I havent been
>>able to work around.  Perhaps someone with more experience can help.
>>
>>1. If you use Monitor Display, say as the result of a long calculation, it
>>retains the same value when you run the workflow again.  Is there a way to
>>clear it at the start of a run?
>>
>>2. If you use Display for, say an actor like SSH to Execute, that has
>>outputs that typically have nothing in them (stderr and error in this case)
>>then a Display attached to them comes up every time and can be a nuisance.
>>Is there a way to make the Display (or an alternative) come up only when
>the
>>output is not empty.  You can't use a Monitor Value in this case as there
>>may be more than one line on those occasions where the output is not empty.
>>
>>Thanks,
>>
>>        -Ken
>>
>>
>>_______________________________________________
>>Kepler-users mailing list
>>Kepler-users at ecoinformatics.org
>>http://mercury.nceas.ucsb.edu/ecoinformatics/mailman/listinfo/kepler-users
>
>------------ 
>Edward A. Lee
>Chair of EECS and Robert S. Pepper Distinguished Professor
>231 Cory Hall, UC Berkeley, Berkeley, CA 94720-1770
>phone: 510-642-0253, fax: 510-642-2845
>eal at eecs.Berkeley.EDU,
>http://www.eecs.berkeley.edu/Faculty/Homepages/lee.html  
>
>
>_______________________________________________
>Kepler-users mailing list
>Kepler-users at ecoinformatics.org
>http://mercury.nceas.ucsb.edu/ecoinformatics/mailman/listinfo/kepler-users

------------ 
Edward A. Lee
Chair of EECS and Robert S. Pepper Distinguished Professor
231 Cory Hall, UC Berkeley, Berkeley, CA 94720-1770
phone: 510-642-0253, fax: 510-642-2845
eal at eecs.Berkeley.EDU, http://www.eecs.berkeley.edu/Faculty/Homepages/lee.html